KIA Warning Light Symbols and Meanings (FULL List, FREE Download)

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the ABS the warning light will remain on. The braking system will be operational without the assistance of the anti-lock brake system. In this case, have your vehicle inspected by an authorized Kia dealer.

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the EPS. In this case, have your vehicle inspected by an authorized Kia dealer.

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the emission control system. In this case, have your vehicle inspected by an authorized Kia dealer.

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When one or more of your tires are significantly underinflated. This warning light remains on after blinking for approximately 60 seconds or repeats blinking on and off at the intervals of approximately 3 seconds.
● When there is a malfunction with the TPMS. In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible.

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the EPB. In this case, have your vehicle inspected by an authorized Kia dealer.

This warning light informs the driver of the following situations:
● LED headlamp malfunction (if equipped)
● Smart Cruise Control with Stop & Go malfunction (if equipped)
● Smart Cruise Control with Stop & Go radar blind (if equipped)
● Forward Collision-Avoidance Assist malfunction (if equipped)
● Blind-Spot Collision Warning radar blind (if equipped)
● Lamp malfunction
● High Beam Assist malfunction
● Tire Pressure Monitoring System (TPMS) malfunction
The Master Warning Light illuminates if one or more of the above warning situations occur. If the warning situation is solved, the master warning light will be turned off.

This indicator light illuminates when there is a malfunction with the FCA. In this case, have the vehicle inspected by an authorized Kia dealer.

This indicator light illuminates when there is a malfunction with the AWD system. In this case, have the vehicle inspected by an authorized Kia dealer.

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the LED headlamp. In this case, have your vehicle inspected by an authorized Kia dealer.
This warning light blinks when there is a malfunction with a LED headlamp-related part. In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the ESC system. In this case, have your vehicle inspected by an authorized Kia dealer.
This indicator light blinks:
While the ESC is operating.

This indicator light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When you deactivate the ESC system by pressing the ESC OFF button.

This indicator light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When you select AWD Lock mode by pressing the AWD LOCK button. The AWD LOCK mode is to increase the drive power when driving on wet pavement, snow covered roads and/or off-road.

This indicator light illuminates when the vehicle detects the immobilizer in your key properly while the ignition switch is ON. At this time, you can start the engine. The indicator light goes off after starting the engine.
This indicator light blinks when there is a malfunction with the immobilizer system. In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light illuminates for up to 30 seconds when the vehicle detects the smart key in the vehicle properly while the Engine Start/Stop Button is ACC or ON. At this time, you can start the engine. The indicator light goes off after starting the engine.
This indicator light blinks for a few seconds when the smart key is not in the vehicle. At this time, you can not start the engine.
This indicator light illuminates for 2 seconds and goes off when the vehicle can not detect the smart key which is in the vehicle while the Engine Start/Stop Button is ON. In this case, have your vehicle inspected by an authorized Kia dealer.
This indicator light blinks:
● When the battery of the smart key is weak. At this time, you can not start the engine. However, you can start the engine if you press the Engine Start/Stop Button with the smart key.
● When there is a malfunction with the immobilizer system. In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light illuminates when you turn the lane-keeping assistant system on by pressing the LKA button. If there is a problem with the system, the yellow LKA indicator will illuminate.

This warning light illuminates:
● Once you set the ignition switch or Engine Start/Stop Button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When you activate the DBC system by pressing the DBC button.
This warning light blinks when the DBC is operating.
This warning light illuminates yellow when there is a malfunction with the DBC system. In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light illuminates when there is a malfunction with the auto hold system. In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light illuminates when you select “SPORT” mode as drive mode.

This warning light blinks 5 times and then illuminates, and a warning chime also sounds 1 time: When the temperature on the Outside Temperature Gauge is below approximately 39°F (4°C) with the ignition switch or ENGINE START/STOP button in the ON position.

This warning light blinks when there is a malfunction with the Dynamic Bending Light (DBL). If there is a malfunction with the Dynamic Bending Light (DBL):
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and restart the engine. If the warning light remains on, have your vehicle inspected by an authorized Kia dealer.

This warning light illuminates:
● When you set the ENGINE START/STOP button to the ON position. The service warning light illuminates for approximately 3 seconds and then turns off when all checks have been performed.
● When there is a problem with the hybrid vehicle control system or hardware.
When the warning light illuminates while driving, or does not go OFF after starting the vehicle, have the vehicle inspected by an authorized Kia dealer.